CL Series

  • Põhiandmed

SKU: d554d551b403 Categories: ,

Description

Residual Capacity at different lifting height

1KG=2.2LB 1INCH=25.4MM

Up to h3 mm ACTUAL CAPACITY (Q) kg
2500 1200 800
2900 1000 650
3200 800 500
Load centre distance (C)mm 600 700

Smooth travel and lift with excellent controls to reduces product damages and increases productivity.

Lift limit switch operates at maximum lift height to shut off pump motor.

A heavy-duty 24-volt electrical system provides good travel and lift speeds.

High quality hydraulic pump assures very little noise, maximum efficiency and durability.

Drive units is equipped with an electromagnetic brake that is spring applied and electrically release. Brake is activated by the control handle position. The handle ergonmically designed with a raising, lowering and horn bottom.

Speed automatically reduces when driving with the forks at a height of 12″ or higher.

Small turn radius makes it suitable for narrow passage ways.

The CURTIS electronic controller helps provide plenty of low end torgue while increasing the motor and battery lift.

Foot pedal reduces fatigue.

Conforms to EN 1726-1 and EN 1175-1

1KG=2.2LB 1INCH=25.4MM

Identification 1.2 Manufacturer’s type designation CL1212 CL1217 CL1226 CL1232 CL1026 CL1032
1.3 Drive:electric(battery or mains),diesel, petrol,fuel gas,manual Electric
1.4 Type of operation:hand,pedestrian,stand ing,seated, order-picker) Pedestrian
1.5 Load Capacity /rated load Q (t) 1.2 1.0
1.6 Load center distance C mm 600
1.8 Load distance, centre of drive axle to fork X mm 711 692
1.9 Wheelbase y mm 1160
Weights 2.1 service Weight Kg 750 785 860 885 840 865
2.2 Axle loading, laden front/rear Kg 925/1025 940/1045 980/1080 990/1095 875/965 885/980
2.3 Axle loadings, unladen front/rear Kg 550/200 580/205 635/225 655/230 620/220 640/225
Wheels?? Chassis 3.1 Tyres:solid rubber, superelastic, pneumatic, polyurethane) polyurethane
3.2 Tyre size, front 250×78
3.3 Tyre size, rear 80×70 1)
3.4 Additional wheels(dimensions) 150×54
3.5 Wheels, number front/rear(x=driven wheels) 1x+2/4
3.6 Track width,front b10(mm) 685
3.7 Track width,rear b11(mm) 390/515
Basic Dimensions 4.2 Lowered mast height h1(mm) 1565 2075 1800 2095 1800 2095
4.3 Free lift h2(mm) 144 144 144 144
4.4 Lift height h3(mm) 1114 1614 2514 3114 2514 3114
4.5 Extended mast height h4(mm) 1565 2075 2920 3530 2920 3530
4.9 Height of tiller in drive position min./max. h14(mm) 985/1365
4.15 Lowered height h13(mm) 86
4.19 Overall length l1(mm) 1860
4.20 Length to face of forks l2(mm) 710
4.21 Overall width b1(mm) 805
4.22 Fork dimensions s/e/l(mm) 60/80/1150
4.25 Width over forks b5(mm) 570/695
4.32 Ground clearance, center of wheelbase m2(mm) 50
4.33 Aisle width for pallets 1000×1200 crossways Ast(mm) 2126 2135
4.34 Aisle width for pallets 800×1200 lengthways Ast(mm) 2092 2106
4.35 Turning radius Wa(mm) 1460
Performance Data 5.1 Travel Speed, laden/unladen km/h 5.2/5.5
5.2 Lift speed, laden/unladen mm/s 105/150
5.3 Lowering speed, laden/unladen mm/s 100/95
5.8 Max.gradient performance,  laden/unladen % 6/12
5.10 Service brake Electromagnetic
E-Motor 6.1 Drive motor rating s2 60min kw 1.2
6.2 Lift motor rating at s3 15% kw 2.2
6.3 Battery acc. To DIN, no 3PZS
6.4 Battery voltage, norminal capacity V/Ah 24/210
Others 8.1 Type of drive control MOSFET Control
8.4 Sound level at driver’s ear acc.to EN12053 dB(A) 67
1)Single wheel F80x93

This specification sheet according to VDI regulation 2198 only provides technical values for the standard truck. Non-standard types, different masts, additional equipment, etc. could produce other values. Right reserved for technical changes and improvements.